ZOTAC Gaming GeForce RTX 5060 Twin Edge Plus (ZT-B50600E2-10M) Graphics Card Launched in India

ZOTAC Gaming GeForce RTX 5060 Twin Edge Plus ZT-B50600E2-10M graphics card with 8GB GDDR7 and dual BladeLink fans
This post contains Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices and availability shown reflect the time of writing and may change.

The ZOTAC Gaming GeForce RTX 5060 Twin Edge Plus Graphics Card (ZT-B50600E2-10M) variant is now listed in India online on Amazon.in at a launch selling price of Rs.61,769 (Lowest Price on September 30, 2026). The MRP price is Rs.90,640.

Built on NVIDIA’s Blackwell architecture, the card carries 3840 CUDA cores, 8GB of GDDR7 memory on a 128-bit bus, and an engine boost clock of 2497 MHz. It measures 220.5 mm long in a 2-slot (41.6 mm) profile, runs off a single 8-pin connector, and the listing states a 5-year warranty.

ZOTAC also sells the ZOTAC Gaming GeForce RTX 5060 AMP Core (ZT-B50600F2-10M) in India, which uses the same 3840 CUDA core GPU and 8GB GDDR7 memory but ships with a higher factory boost clock of 2587 MHz.

Pricing & Availability

ModelLaunch PriceLink
ZOTAC Gaming GeForce RTX 5060 Twin Edge Plus ZT-B50600E2-10M (8GB GDDR7)Rs.61,769Amazon India↗

What We Like About the ZOTAC RTX 5060 Twin Edge Plus ZT-B50600E2-10M

  • 220.5 mm length, 2-slot profile: sized to fit small form factor PC cases
  • 8GB GDDR7 at 28 Gbps: current-generation graphics memory on a 128-bit bus
  • 3x DisplayPort 2.1b: supports up to 4K 480Hz or 8K 165Hz with DSC
  • Single 8-pin power with a 550W PSU requirement: no 16-pin adapter needed
  • 5-year warranty: stated on the Amazon India listing

The ZT-B50600E2-10M uses NVIDIA’s Blackwell architecture, with 3840 CUDA cores, 5th Gen Tensor Cores and 4th Gen RT Cores for ray tracing. The engine boost clock is set at 2497 MHz. The card supports NVIDIA DLSS 4.5, NVIDIA’s AI-based upscaling and frame generation.

Memory is 8GB of GDDR7 on a 128-bit bus, running at a 28 Gbps memory clock. The card connects to the motherboard over PCIe 5.0.

It comes with the following ports / display outputs:

PortQuantityVersion
DisplayPort32.1b (up to 4K 480Hz or 8K 165Hz with DSC)
HDMI12.1b

Cooling comes from dual 90mm BladeLink fans with a metal backplate. ZOTAC’s FREEZE Fan Stop stops the fans under low loads, which the company says keeps the card near-silent during light use.

The card is 220.5 mm (8.7 in) long and 41.6 mm thick, a 2-slot design that ZOTAC labels SFF Ready. Power comes through a single 8-pin input, and ZOTAC recommends a 550W power supply.

ZOTAC Gaming GeForce RTX 5060 Twin Edge Plus ZT-B50600E2-10M Specifications / Technical Details

SpecificationDetails
ModelZT-B50600E2-10M
UPC810012087285
GPUNVIDIA GeForce RTX 5060
ArchitectureNVIDIA Blackwell
CUDA Cores3840
Tensor Cores5th Gen
RT Cores4th Gen
Engine Boost Clock2497 MHz
Memory8GB GDDR7
Memory Bus128-bit
Memory Clock28 Gbps
InterfacePCIe 5.0
UpscalingNVIDIA DLSS 4.5
Display Outputs3x DisplayPort 2.1b, 1x HDMI 2.1b
Max Resolution4K 480Hz or 8K 165Hz with DSC
CoolingDual 90mm BladeLink fans, FREEZE Fan Stop
BackplateMetal
Length220.5 mm (8.7 in)
Slot Width2-slot (41.6 mm)
Power Connector1x 8-pin
Recommended PSU550W
ColourBlack
Warranty5 years (as stated on the listing)

Related Blogs to Check out

Note: Specifications listed above are based on available information and may not be 100% accurate. Please visit the official ZOTAC website or Amazon product page to verify complete and up-to-date specifications before making a purchase decision.

Disclaimer: We strongly recommend reading verified purchase reviews before making any online purchase. Always buy from trusted sellers. Discounts are often based on MRP prices. As an Amazon Associate, we may earn a commission from qualifying purchases made through links on this blog.